Like other high-technology washers, the Kenmore Elite washer also shows error codes when something gets unworking. If you also own this appliance and don’t know what 1E on Kenmore elite washer means and how to fix it, this guide is for you.
Fortunately, this error code is relatively common and can be easily resolved with a few simple steps.
Below we’ve described what is this Kenmore elite washer error code 1e, and what you can do to clear it from your device.
Table of Contents
What does E1 mean on Kenmore washer?
Practically, The 1E error code on a Kenmore washer typically indicates a water inlet problem. This means that the washer is not able to properly fill in the drum, which can cause issues with cleaning your clothes. It indicates the same issue in top load and front load models.
The most common causes of this error code include:
- Water supply issues: If there is an issue with the water supply to your washer, such as low water pressure or a clogged inlet valve, it can cause the E1 error code to appear.
- Faulty water inlet valve: The water inlet valve is responsible for controlling the flow of water into your washer. If this valve becomes faulty, it can prevent your washer from filling with water properly and trigger the E1 error code.
- Clogged water inlet filters: Your Kenmore washer is equipped with water inlet filters that are designed to prevent debris from entering the machine. If these filters become clogged, it can prevent water from flowing into the washer and trigger the E1 error code.
How to Fix the E1 error on the Kenmore washer?
Generally, we need to have a washer in an error-free state to utilize it. However, Although you can wash as many as loads you want, yet the washer can’t wash a single load until the inlet water issue gets resolved.
Follow the below steps to resolve the E1 error code on your Kenmore washer:
- Check the Water Supply: Make sure that the water supply to your washer is turned on and that the water pressure is sufficient. If you have low water pressure, Check the pipe which supplies water to the washer. A blockage in the pipe can also lower the pressure of water as it allows little water to pass ahead. You should also make sure your house water tank has sufficient water to supply to the washer. If the house tank has no or little water, the water in the pipes will come slower with little pressure.
- Inspect the Water Inlet Valve: Your washer has a water inlet valve which is responsible for filling the drum according to the required amount. Examine the water inlet valve for signs of damage or wear. You can check if the valve is working correctly by using a multimeter to test for continuity. If the valve appears to be faulty, it may need to be replaced. To get a new valve for replacement, always check the model number of your unit.
- Clean the Water Inlet Filters and Hoses: First, turn off the water supply and unplug your appliance. Then locate the inlet filters and hoses, and remove them carefully. Hoses and filters are located in the back of your washer. Clean the filters with a soft brush or cloth and rinse them under running water. If the hoses are dirty, use a mixture of water and vinegar to clean them thoroughly. Finally, reattach the filters and hoses and turn on the water supply to test the flow.
- Reset the Washer: If the above steps do not resolve the E1 error code, try resetting your Kenmore washer. Unplug the machine for a few minutes and then plug it back in. This may clear any minor glitches that are causing the error code.
Tips for Preventing the Kenmore Elite Washer 1E Error Code:
Fortunately, there are some steps you can take to prevent a 1E error code from happening in the first place. By following the next described tips, you can help ensure that your washer stays in good working order and avoid the hassle of dealing with error codes.
- Check the water supply hoses at least once a month: Make sure the hoses are properly connected and not kinked, crushed, or damaged. Replace the hoses if they are damaged.
- Inspect the water pressure: Low water pressure can cause the 1E error code to appear. Make sure your water pressure is strong enough for your washer to function properly.
- Clean the screens on the water supply valves after every 40 washes: Debris can accumulate on the screens of the water supply valves over time, leading to low water pressure. You must clean the screens to ensure they’re not blocked.
- Use a water filter: Depending on the quality of your home’s water supply, you may want to install a water filter. This can help prevent mineral buildup and other contaminants from affecting your washer’s performance. You will not need to install a water filter additionally if your unit already has one.
- Avoid using too many appliances at once: We found that Running too many appliances at the same time can put a strain on your home’s water supply and cause the 1E error code to appear. Try to stagger appliance use as much as possible to avoid this issue.
Final Thoughts
Whenever you encounter the E1 error code on your Kenmore Elite washer, just check the water supply mechanism. By following this guide, you can resolve the issue and get your washer back to functioning properly again. Keep the inlet hoses and filters clean to keep them blockage free.
Regular maintenance of your washer can also help prevent the occurrence of error codes and ensure its optimal performance.