Are you seeing an E1 error code on your Avanti washer? This can be a wondering experience, especially if you are in the middle of doing your laundry. However, there is no need to worry. In this article, we will explain what the Avanti washer E1 error code means, what causes it, and what steps you can take to fix it.
If you’re seeing E1 on your Avanti washer, an issue in the drain system of the appliance is preventing wastewater from getting out from the drum. It can be caused by problems in the drain pump, hose, and blocked drain filter.
Let’s understand how you can resolve the E1 error on the Avanti washer.
Table of Contents
What does error code E1 mean on Avanti Washer?
Technically, The E1 error code on an Avanti washer means that there is a problem with the water drain pump, hose, or filter. This pump is responsible for draining the dirty water out of the washing machine during the wash cycle. When the pump fails to function correctly, it can cause issues with the washing machine and trigger the E1 error code.
All the components that drain gray water from the drum should be clean and working in your Avanti washer. The washer does not fill when the wastewater is in the drum. Filling the clean water requires draining all the used water from the drum for the next load.
In simple words, an issue with the drain system in an Avanti washer leads to E1 error code on display.
What Causes the E1 Error Code?
Truthfully, there is no fixed cause behind this issue. Technically, there are several reasons why your Avanti washer may be displaying the E1 error code. The most common causes include:
- Malfunctioning Water Drain Pump: If the water drain pump is faulty, it can also cause the E1 error code to appear. This may be due to wear and tear, damage, or other issues with the pump’s components.
- Kinked drain hose: Make sure the drain hose is not kinked or clogged. If there is a blockage, remove it and make sure the hose is not bent.
- Check the filter: If your Avanti washer has a drain filter that prevents particles from entering the drain pump. Check it for any debris or buildup that could be blocking the flow of water.
How to Fix E1 Error on Avanti Washer?
If you are experiencing the E1 error code on your Avanti washer, there are several steps you can take to resolve the issue. If the issue is just a blockage in the draining system, you can simply resolve this code by unclogging it. However, if something is faulty, you may need to replace or repair it.
Here are proven solutions to fix the E1 Avanti washer error code:
- Check the Draining System: The first step is to check the draining system for any clogs or blockages. You can do this by inspecting the drain hose, pump filter, and pump itself. If you find any clogs or blockages, remove them and make them clog-free. After that, try running the washing machine again. If cleaning these components did not solve the issue, proceed with the next step.
- Check the Water Drain Pump: If the draining system is clear and the E1 error code persists, it may indicate a problem with the water drain pump. First of all, unplug the washer from the mains and isolate it from electricity. Now, You can check the pump by opening up the back cover of the washing machine. By doing this you will get access to the drain pump and inspect it for any signs of damage or wear. If you notice any issues, you may need to replace the pump.
- Reset the Washing Machine: If neither of the above steps works, you can try resetting the washing machine. To do this, Simply unplug the machine from the power source for a few minutes, then plug it back in and turn it on again. This may help to clear any temporary glitches in the machine’s system. This method sometimes works like a charm.
If unfortunately, none of the above steps work with your unit, you can also read the manual given with your unit. The information described in the product manual may provide a solution that will get your washing machine back to functioning properly.
Tips to Prevent Avanti Washer E1 Error Code:
Practically, Maintaining the drain system of your Avanti washer provenly prevents the E1 Error from occurring in future.
Here are some tips to maintain the draining system:
- Keep the Drain Hose clean: once in a month, you should Check the drain hose for any clogs or obstructions. If you found any blockage, Use a long, flexible brush or a plumber’s snake to clear out any debris that may be blocking the hose.
- Keep the Drain Pump Debris-free: The drain pump is responsible for removing the water from the washer. Make sure it is always clean and free from any debris or obstructions. You can do this by removing the drain pump filter and cleaning it with water.
- Use the Correct Detergent: Using too much detergent can cause excess suds, which can lead to draining problems. Always use the recommended amount of detergent for your washer.
- Use Hot Water: Hot water can help dissolve and remove any buildup in the draining system. Simply run a hot water cycle with no clothes in the washer once a month to help keep the system clean.
- Keep the Drain filter clean: The drain filter can become clogged with lint, hair, and other debris over time. Inspect the drain filter once a month and clean it if necessary to prevent draining issues.