Black and Decker Toaster Oven Knob Stuck? (Solved)

Every knob on the Black and Decker toaster oven should be working well to cook food inside it. Each dial has its functionality, such as it sets the temperature, mode, and time. 

In case the knob is stuck and unresponsive, the user cannot use the appliance until it gets fixed. However, it can be fixed if done correctly.

If your Black & Decker toaster oven knob is stuck, it should be replaced to permanently fix the issue. It is damaged from the internal point and some broken part is not letting it turn. You will have to disassemble the covers to access and fix this problem.

In further sections, we’ve gathered important information to fix a stuck knob on a toaster oven.

Black and Decker Toaster Oven Knob Stuck?

Reasons Black and Decker Toaster Oven Knob Stuck?

Knobs on the Black and Decker toaster ovens play an important role in the appliance’s working. If any knob is unresponsive or won’t turn, this will cause issues in cooking with a toaster oven. So the knob on your Black and Decker toaster oven is stuck, first address the issue to fix it.

The following are common causes of stuck knobs in toaster ovens:

  • The knob is damaged from the inside: Technically, you see a simple dial from the outside of the appliance, but more than half of it exists inside the device. 

The knob you can view from the outside is attached to the shaft of an inside knob switch mechanism. 

If something gets damaged around the shaft or the shaft itself gets damaged, this can get stuck inside the shaft rotating area and result in a stuck knob. 

Typically, all the knobs and their system are made of plastic. With some hard pressure, the knob or its internal parts can break and stop working. So as a user, you must consider avoiding creating any pressure on the knob whenever you turn it. 

Every dial on a toaster oven has switches attached to it from the inside, so if any internal components get broken, this can prevent the knob from turning in any direction. 

However, this is not only the probable cause, the following is another probable cause that can create this issue.

  • Dust or a practical stuck inside the knob: Sometimes individuals only pay attention to cleaning the toaster oven from the inside. But in actuality, the device should be cleaned from both sides – from inside and outside. 

If the unit is old, sometimes the oven times dust goes inside the knob and makes it difficult to turn. In case users don’t remove this dust from the dial inside, this will stick to the knob and will not let it turn. 

As a user of this unit, I must clean it from the outside and inside. Make sure the unit is not placed in an area where dust is ordinary. 

If you’re using the toaster oven outdoors, you must prevent it from getting into contact with dust, soil, and air particles. 

If the user often turns the knob with oily hands, this can stick the oil on the knob and inside its gaps. As we know, the dust gets easily stuck on the oil, it can stick to the knob over time.

How to Fix a Stuck Knob on Black and Decker Toaster Oven?

You can simply fix a Stuck knob in a Black and Decker toaster oven. As there are only two probabilities why it is not turning, you’ve to follow the fix for each cause. 

Tools required: A long magnetic screwdriver and too-thin metal wire are required. You might need to have a new knob if it is damaged.

Time required: 10 – 20 minutes.

Implement the following steps to fix a stuck knob on your toaster oven:

  1. Unplug the cord of the appliance from the outlet.
  1. Place it on enough counter space where space will not be another issue for repairing.
  1. Keep a closer look at the knob and check if there is dirt inside the gap of the knob.
  1. Use a too-thin metal wire and insert it into the gap where the knob is connected. Make it clean and remove all the dirt. Once it is cleaned, try to turn it. If it now working, good. In case still not turning, proceed.
  1. Take a long magnetic screwdriver and open the screws holding the upper cover of your toaster oven. Consider collecting all the screws in one container.
  1. Access the stuck knob from inside the appliance and address the cause.
  1. If the knob internal is broken, you’ll have to replace the Black and Decker toaster oven knob. Get a new knob according to the model number.
  1. Disconnect the wiring from the faulty knob and remove it.
  1. Now, fit the new one in its position. Connect the wiring to the new knob.
  1. Assemble the covers back on the unit and make sure the screws are tightened.
  1. Now, the knob is fixed and turning. All done.

Why Dail on the Black and Decker Toaster Oven Keeps Getting Stuck?

Sometimes the user turns the dial by putting some pressure on it. This is improper use of the knob. A dial should be turned gently, so it can’t damage or become unresponsive. If the dial is stuck on the Black and Decker toaster oven, verify that the dial is in its position. 

Turning the knob with pressure can push the dial inward and make a barrier in its working. It can also break tiny parts associated with dial functionality. 

So if the dial is stuck and also shaking inward and outward, this might be a sign that someone turned it the wrong way and now you have to replace it to permanently fix it. 

On the other hand, if any residue goes inside the dial shaft, it can also prevent it from turning, however, as a plastic part it won’t require lubricant. But, it must be clean and dust-free to work well and responsibly. 

In case the device is brand new and has never been used before, there is a manufacturing flaw, or might be created during shipment. New units usually are under warranty. 

However, whatever the cause could be, it is necessary for having a well-working knob on the Black and Decker toaster oven if you want to use it.