Sometimes, washing machines sound like an airplane when we run the cycle. This issue mostly happens in aged washers. If you’re thinking that why is my Indesit washing machine so loud noise when spinning, this guide is for you
Your Indesit washing machine can cause loud noise when spinning due to some possible internal parts issues, such as breakage, worn carbon brushes, worn shockers, foreign objects, or wrong installation. However, contact the company support if the appliance is new or under warranty for fixes.
To fix the loud noise from your Indesit washing machine, you have to check the possible damage or working of parts. Let’s move forward to understand how you can fix loud noise from your Indesit washer.
Table of Contents
Reasons Indesit Washing Machine So Loud Noise When Spinning:
Before fixing the noise from your device, you have to know what is causing it. Moreover, it is impossible to correct the issue if you don’t know what is responsible for that. Keep an eye on your and your device’s safety if you’re going to detect the problem yourself in your machine.
Here’re possible causes of the Indesit washing machine so loud noise when spinning:
- Breakage:
Some parts face breakdown that causes banging noise during the cycle. Usually, bearing breakage is a common issue in aged machines. Machines have a round part called an impeller which works by rotating and when its bearing or any part goes bad, it creates noise.
This breakage can be caused by overloaded cycles. That’s why experts like homestuffer recommend avoiding overloading washing drums. If you’re using a machine after many months and rust is formed on the rotating parts like the shaft down to the drum connected with the motor.
This rust makes it harder for a machine to rotate parts smoothly and as it rubs inside two parts, noise is caused. Rust can also cause breakage as it makes it difficult for rotating parts to rotate smoothly.
- Worn Carbon Brushes:
Washing machine motor spin drum with the help of a motor, such as spin, or a wash motor. Carbon bushes are a machine part for the motor that moves power to the center of the motor.
These carbon brushes are spring-loaded. If they go bad or worn out, washing machines usually start producing loud noises. To check the motor bushes, you have to check the motor that is typically located at the bottom of the device.
Be sure the power is off before touching the machine parts. However, some washing machines don’t have carbon bushes as their motors use capacitors wired into them. Unfortunately, carbon bushes cannot be repaired, the washer owner will have to replace them and replacement costs much more.
- Foreign Objects:
When we do laundry, washing machines wash/spin clothes inside the drum. When some foreign things or materials get stuck inside the washing drum, door, or internal parts, the machine typically starts producing loud noise. These foreign materials could be hair, rubber, dust particles, etc. Moreover, if these particles go away from the drum but get stuck inside the hose, they can also cause clog and drainage problems.
Sometimes we forget some objects in the pockets of our garments while putting them into the drum. After that, if those objects go inside the impeller or agitator, it causes sound and it may become impossible for you to detect what is causing that issue.
- Wrong Installation:
Be sure to check the device level on the floor. If an appliance’s installation is done wrongly, it increases the chance that the machine will face some internal issues. Not all floors are suitable to place a heavy device like a washer as some bases have less capacity to handle load and vibration from the device.
You have to place the washing machine on a flat and even surface so it will not bend or create faulty machine parts. If the washing machine is vibrating too much and jumping on the base, that’s a clear sign the base is not capable of handling the load and pressure. Choose a concrete build floor if possible otherwise, if your wood surface can handle an adult’s jump, you can place your washer there.
- The Belt Worn Out:
Washing machines use belts to rotate the shaft that is connected to the motor. This belt fits on motor and shaft pulleys that help drums to rotate.
If by chance this belt is worn out, it can cause noise and if you don’t pay attention to replacing the belt, it will stop the machine during the cycle. This problem is usually found in old washing machines.
After a few years, the washing machine motor belt gets damaged due to material getting affected by spinning and high usage. It might cause a very loud banging noise when spinning.
- Faulty Piece:
It is a rare case but an attention-paying case. Sometimes, we just bought a product from a company and by chance, the company had missed testing that.
If it happens, the product itself comes with fault because of missed testing. In a few cases, we found that some devices have loose screws which are stuck inside some parts, and when the appliance runs, it causes unusual sounds.
If you hear noise near the impeller, it may be a case, something is jumping or rubbing with the part, it could be anything, a foreign object, or a machine’s loose part.
How Do You Fix a Noisy Washing Machine When Spinning?
If a person is not an electrician, it might be impossible for them to fix an electronic. However, they can detect the cause of the problem. If you’re hearing noise from your Indesit washing machine when it spins, you can follow the below described best particles to fix it.
Here’s how to fix a noisy washing machine:
- Before checking for any cause, unplug the machine or power off the machine.
- Check if there are foreign objects stuck inside the machine, and take out those objects.
- Make sure motor carbon brushes or spin springs are well, if they are worn out, replace them.
- Take a look at machine motor belts. Open the back cover of the machine and check the belt condition. Replace the belt if it goes bad.
- Get a leveler and check if the machine is placed at an even level. Place your machine on a flat surface.
- Contact company support if you didn’t find any cause yourself and ask them about the problem.
- If the machine motor is releasing an odor, check if the motor is not facing and short circuits.
To Conclude
The loud sound from the washing machine is the result of an issue with-in internal parts. Users have to manually detect the cause so that noise can be stopped. However, if users don’t want to do it themselves, they can contact company support