Samsung Oven Getting Too Hot? (Solution)

You have to pay attention to fixing your Samsung oven if it is getting too hot. Every oven user knows that the oven produces heat to cook the food. But if it is producing over temperature than required, it can probably affect the condition of its components. Parts like heating elements and sensors have more chances to get damaged when the oven continuously gets overheated.

Technically, issues in the oven’s igniter, temperature sensor, calibration, ventilation system, and control board can cause a Samsung oven to get too hot. This is advisable to work on fixing this issue as soon as possible in your unit to avoid further probable issues.

We’ve gathered everything in this post that will help you to fix a samsung oven that is getting too hot.

Samsung Oven Getting Too Hot?

What causes a Samsung oven to get too hot?

Knowing what can cause an oven to get too hot will provide you with an idea of where to start inspecting the cause in your unit. Several types of faults can cause this issue in your samsung oven, so you need to check for each described cause intentionally to reach out to the actual fault.

The following are causes of temperature issues in a samsung oven:

  1. Oven Igniter Malfunction 

The oven igniter is responsible for lighting the gas or heating element. It is an electrical part that is located inside the mechanism of an oven. 

If the igniter malfunctions, it might cause the oven to release excessive heat. Check for signs of wear and tear or malfunctioning igniter connections.

  1. Defective Temperature Sensor

The temperature sensor monitors the oven’s internal temperature and communicates it to the control board. 

This sensor provides signals about the internal temperature levels. The control board uses these signals to increase and decrease the heat. A faulty sensor can lead to incorrect readings and cause the oven to overheat.

  1. Calibration Issues

Factory-set temperature calibration may not always be accurate. If the oven temperature is consistently off, it could be due to a calibration problem.

  1. Faulty Control Board 

The control board is the leader of every part in the oven. It provides the output to the heating elements on how much the temperature is needed. In case this component is defective, overheating issues in the Samsung oven is possible. 

A defective control board might not regulate the oven’s temperature properly, which will lead the unit to overheating issues.

  1. Airflow Problems 

Appliances like air fryers, toaster ovens, and ovens require proper air flow. This is because these appliances produce heat and usually have fans to recool. 

In case the appliance fan is not working or is placed in a poor airflow area, this will create a poor airflow situation. Eventually, poor airflow within the oven cavity can cause heat to accumulate unevenly, leading to hot spots.

How to fix a Samsung oven that is getting too hot?

You can try several types of best practices to troubleshoot your samsung oven temperature issues like overheating.

Here’s how to stop your samsung oven from getting too hot:

#Step 1. Safety First: You must always disconnect the oven from its power source before attempting any repairs.

#Step 2. Oven Igniter Replacement: 

If you suspect a faulty oven igniter, consult your Samsung oven’s manual to locate it and follow the manufacturer’s instructions to replace it. Ensure the new igniter is compatible with your oven model.

#Step 3. Temperature Sensor Replacement: 

Identify the temperature sensor location in your oven. It is usually near the rear wall. Carefully replace it with a compatible part to fix a defective temperature sensor. Consult the oven’s manual or seek professional assistance if needed.

#Step 4. Calibrating the Oven Temperature: 

Next, refer to your oven’s user manual for instructions on how to calibrate the temperature settings. Most Samsung ovens have a calibration feature that allows you to adjust the temperature settings to match an external thermometer.

#Step 5. Control Board Repair or Replacement: 

If you suspect a faulty control board, you will need to replace it. Note: Control board repairs require expertise and technical knowledge. It’s best to contact Samsung’s customer support or a certified technician to diagnose and repair the issue. 

#Step 6. Ensure Adequate Airflow: 

Clean the oven interior regularly to remove any obstructions or residue that might hinder proper airflow. Avoid overcrowding the oven, which can disrupt heat distribution.

Samsung oven burner too hot:

If you have a gas oven, clean the burner ports regularly to ensure proper gas flow and reduce the risk of excessive heat production. This will help your samsung gas oven to prevent overheating.

In case your oven’s burner flame is consistently too high, consult a professional to adjust the gas regulator to the appropriate level.

How do I fix the temperature sensor on my Samsung oven?

Temperature sensor issues are common in ovens. Fixing or repairing this part requires technical skills. Below are general steps to fix a faulty temperature sensor in an oven:

  • If of all, disconnect the oven from the power source before attempting any repairs.
  • Next, Locate the Temperature Sensor. Typically, it is located at the back of the oven cavity. You can also refer to the oven’s user manual to identify the location of the temperature sensor.
  • Now you need to remove the Old faulty Sensor. Gently detach the temperature sensor from its connectors or mounting brackets. Take note of the sensor’s orientation to install the new one correctly.
  • Get a new temperature sensor according to your oven’s model to replace it.
  • Once you get the new one, Install it. Carefully install the new temperature sensor and secure it in place using the appropriate connectors or brackets.
  • Lastly, Reconnect the oven to the power source and test it to ensure the temperature sensor is now functioning correctly.

How do I calibrate my Samsung oven temperature?

This is necessary to have knowledge of calibrating oven temperature. If you don’t know how to do this, follow the steps described below:

  • First you will need to preheat your Oven. Allow it to preheat for at least 20 minutes to ensure it reaches its intended temperature.
  • After that, use an Oven Thermometer. Place an oven-safe thermometer on the center rack and close the oven door. Wait for a few minutes for the thermometer to stabilize.
  • Now, Check the temperature reading on the oven thermometer and compare it to the oven’s set temperature. Note any discrepancies.
  • You can adjust the Calibration now. Refer to your Samsung oven’s user manual to find the calibration instructions. Typically, this involves pressing a combination of buttons or accessing the oven’s settings to adjust the temperature calibration up or down as needed.
  • Lastly, Repeat the process of preheating the oven and using the oven thermometer to verify if the calibration adjustment was successful.


A Samsung oven that gets too hot can make you wonder, but identifying the potential causes 

can help you to resolve the issue.

You should place your oven where it has proper airflow. Moreover, maintaining the oven can mostly keep it safe from overheating.

Remember to prioritize safety and seek professional assistance if you encounter any challenges during the troubleshooting process.