If you’re seeing a 4C code on your Samsung washer, your appliance is informing you that it is receiving less water than required.
Moreover, this also indicates that more than water is needed for washing load and you need to fill more water. In this post, we’ve described how to fix a Samsung washer 4C code but it is full of water in the drum.
Technically, the inlet water pressure detecting sensor is faulty, or a blockage in the dispenser drawer can cause a Samsung washer to show a 4C code even if it’s full of water. In addition, it can also happen when a circuit board malfunctions.
Let’s understand the causes and fixes of the Samsung washer 4C code when full of water.
Table of Contents
What Does It Mean When Your Samsung Washer Says 4C?
Samsung smart front load washers come with inbuilt sensors to detect water supply pressure. When a user sees a 4C error code, this means the water is not pressure is less than 0.5bar – 8bar, which is not sufficient to fill the drum and will take too long.
When this error displays on your washer, you need to check the inlet hoses, mesh filters, and dispensers. If the mesh filter and inlet hoses are fine and clean, check the dispenser as any blockage can also cause this issue.
Some people have reported that their Samsung washer still shows a 4C error when the drum is full of water. This happens when there is an issue with the control board of the washer, or the water level and pressure detecting sensors are faulty.
However, fixing this error is simple. If every hardware seems clean and fine, you should reset the unit as sometimes a small software glitch can mistakenly lead the washer to represent an error message.
Moreover, sometimes owners are required to seek a technician for assistance in fixing an error due to a non-detected fault.
Sometimes people just check the intel hoses for clogs and damage to fix the 4C error, but they fail to fix it because they don’t check the mesh filter connected to the inlet hose connection on the back of the washer.
When the mash filter is filled with dirt, it becomes clogged and makes it difficult to water supply and pressure. It is necessary to keep the hose and mesh filters to prevent any blockage and issues in the inlet water supply.
Why Does Samsung Washer 4C Code but Full of Water?
First of all, you should understand why the 4C error code on the Samsung washer occurs. This is because this error doesn’t link with the water level in the drum, it is only made for and shows when the inlet water doesn’t come with enough water.
The water level checking sensor and water pressure checking sensor, or control board may be faulty when you see a 4C error on your Samsung washer while it is full of water. So you have to replace the faulty sensor to fix this issue.
You should also check whether the issue is hardware-related or software related. A temporary fault the the in washer operating software can also cause any error randomly without any reason.
So, before seeking help from a technician, you should reset the unit 1 or 2 times to ensure there is no software glitch occurring in your Samsung washer. In case the unit is new and a 4C error occurs but there is no cause detected, contact the manufacturer as there could be manufacturing flaws in the unit.
Sometimes we think the water in the washer and drum is full of water for washing the next load. But, probably it happened contrary to the water is at a lower level. So the washer tries to fill the water in the machine but due to low water pressure, the machine shows a 4C error code. Make sure the inlet water supply is turned On.
How to fix 4C Code on a Samsung washer when full of Water?
Here are some step-by-step instructions to help you out to Fix the 4C Samsung washer error:
Step 1: Turn off the washer
First things first, make sure to turn off your washer. You can do this by pressing the power button or unplugging the washer from the power source.
Step 2: Check for visible issues
Next, take a close look at your washer and check for any visible issues. Are the water supply hoses twisted or damaged? Is the drain hose clogged? If you notice any visible issues, try to fix them before proceeding to the next step.
Step 3: Check the water level sensor
Now it’s time to check the water level sensor. This sensor is located inside the cabinet in the back of your Samsung washer and measures the amount of water in the tub. If the sensor is faulty, it can cause the 4C error code. Take a look at the sensor for any visible damage or wear and tear. If you notice any issues, you’ll need to replace the sensor.
Step 4: Check the water pressure-detecting sensor
The water pressure detecting sensor is also located in the water level sensor switch of your washer. It detects the water pressure in the tub and sends the information to the control board. If this sensor is faulty, it can cause the 4C error code. Check the sensor for any visible damage or wear and tear. If it’s damaged, you’ll need to replace it.
Step 5: Check the dispenser for blockages
Now it’s time to check the dispenser for any blockages. The dispenser is located at the front of your washer and dispenses detergent, fabric softener, and bleach during the wash cycle. If the dispenser is clogged or blocked, it can cause the 4C error code. Check the dispenser for any visible blockages or buildup. If you notice any issues, use a toothbrush or a small brush to clean the dispenser.
Step 6: Replace damaged parts
If the water level sensor, water pressure detecting sensor, or dispenser is damaged and can’t be repaired, you’ll need to replace it. You can order new sensors or a new dispenser from the manufacturer or from a local appliance parts store. Once you have the new parts, disconnect the old parts and install the new ones.
Step 7: Test the washer
Finally, test your Samsung washer to make sure that the 4C error code is no longer displayed. Turn on the washer and run a cycle to check if it’s working properly. If everything is working fine, then congratulations! You’ve successfully fixed the 4C error code on your Samsung washer.
Conclusion:
If your Samsung washer is showing a 4C code even though it’s full of water, there could be multiple reasons for this issue. One of the most common reasons is a faulty water pressure detecting sensor or a blockage in the dispenser drawer. Alternatively, a malfunctioning circuit board could also be the culprit.
Therefore, it is important to thoroughly check each of these components and diagnose the root cause of the problem before attempting any repairs.