Whirlpool ovens are loaded with features, including alerts such as Stop and Hot, etc. If you’ve encountered Stop in Whirlpool Ovens, you must know what it means and what needs to be done next.
Stop warning on the oven is a technical warning. This gets displayed when the unit detects an electric power shortage or no power at all for work. This typically happens when there is a power cut in your area or circuit breakers are turned off.
However, it doesn’t require technical knowledge to fix this warning. Simply resetting the appliance when it gains power access again can resolve the issue.
Table of Contents
Why does the Whirlpool oven stop?
The “Stop” message on your Whirlpool oven can be puzzling, but it is possible to fix this matter. Generally, One common reason for the “Stop” message is a power cut or the power being turned off to the oven.
However, when the power is restored, the oven’s control board may need to be reset to clear the error message and get your oven back to its cooking glory.
In case there is no power cut situation in your house, make sure the appliance is properly plugged in. A faulty main control board can also lead to error codes without any reason.
On the assumption that you have found everything fine, still the stop warning is there, inspecting the fault in the control board will be necessary.
Whirlpool oven says stop after power cut?
If you’ve experienced a power cut or intentionally turned off the power to your Whirlpool oven, it’s not uncommon to see the dreaded “Stop” message on the display when you try to use it afterward. Possibly, resetting the Whirlpool oven control board is often all it takes to fix the issue.
Let’s walk through the process step by step:
- First, ensure the two outer knobs on the oven are fully pushed in. This ensures that they are properly engaged with the control board.
- Press and hold the middle button on the control panel until you are instructed to release it. This step initiates the reset process.
- Press the left button to release it. Keep in mind that the button should be pressed just once.
- Now, give the left button a complete clockwise turn. You should hear a reassuring beep as you do so. After turning the button, push it back in.
- Release the middle button you were holding. This step finalizes the reset process.
- Press the right button to release it, just like you did with the left button. One press is all it takes.
- Press the middle button twice consecutively to continue the reset process.
- The display will now prompt you to set the current time. Use the right button to adjust the time accordingly.
- Once you’ve set the correct time, press the middle button to save the settings and lock in the time.
- Finally, turn the left-hand knob to the “Off” position.
- Restore power to the oven, either by plugging it back in or turning on the circuit breaker.
Your Whirlpool oven should now be reset and ready to use without displaying the “Stop” message. However, if the error persists or if you encounter any other issues with your oven, it’s always a good idea to consult the oven’s manual or reach out to Whirlpool customer support for further guidance.
How to prevent STOP on Whirlpool ovens?
It is always good to always be ready to prevent any error code from occurring in the unit. The blower is some simple tips to help prevent or minimize this issue:
One way to safeguard your oven is by connecting it to an Uninterruptible Power Supply (UPS). A UPS acts as a backup power source, providing temporary electricity during a power outage. This can help prevent STOP errors caused by sudden power cuts.
Another option is to use a surge protector. Plugging your oven into a surge protector can protect it from power surges that often occur when the power is restored after an outage. Power surges can potentially cause errors in the oven’s functioning.
Consider installing a backup power system in your home, such as a generator or battery backup. These systems provide continuous power during outages along with ensuring the uninterrupted operation of your oven.
It’s also a good idea to check the electrical wiring in your home. Faulty or outdated wiring can lead to power interruptions and affect your oven’s performance.
Try resetting your oven once the power is restored after the power cut. Consult your oven’s user manual for instructions on how to perform a reset.
If the STOP error persists, it’s recommended to contact Whirlpool customer support. They can provide further guidance or arrange for a service technician to diagnose and fix the issue.
You can possibly help prevent or reduce STOP errors on your Whirlpool oven during power cuts by following these simple tips.
Conclusion
Technically, the “Stop” message on your Whirlpool oven can be resolved by following a simple reset process. You can reset the control board and eliminate the “Stop” message by ensuring the knobs are pushed in, holding and releasing buttons in the correct sequence, setting the time, and turning the oven off.
Remember to consult the oven’s manual or reach out to Whirlpool customer support if you encounter any persistent issues. You’ll be back to cooking delicious meals in no time with these steps.