Whirlpool ovens don’t reset by themselves until the user makes a request. In case your Whirlpool oven keeps resetting, there is an issue. Sometimes the units can restart in the middle of the function or sometime just after turning on.
A faulty printed circuit board is the cause of the keep resetting problem in your oven. This is a hardware-related issue, so it requires a manual inspection to fix it. Moreover, parts like transformers and power switches can also cause this issue if they are dealing with any issue.
Let’s understand what you should do to fix your Whirlpool oven that keeps resetting.
Table of Contents
Whirlpool oven clock keeps resetting?
Sometimes not only the main unit, its clock only starts resetting. The user’s selected desired time got reset automatically due to an internal fault in the oven.
Technically, the Whirlpool oven clock keeps resetting and the oven starts showing the wrong time when the appliance becomes disconnected from your home network and mobile app.
Whenever you find your oven time/clock experiencing problems, such as displaying the wrong time, the wrong time zone, or not updating at all, make sure your Whirlpool appliance is connected to your home network and mobile app.
Your Whirlpool oven will automatically keep or update the date and time when it is connected to the mobile app and home network.
However, if the oven clock keeps resetting without any reason described above, probably its control board is faulty and may be providing wrong commands to the clock function.
In this case, you will need to check your appliance, and reaching out to a professional would be necessary to fix the issue.
Whirlpool electric oven keeps resetting the temperature?
If the temperature of your Whirlpool electric oven keeps resetting, the thermostat of your oven is faulty as it is sensing the wrong temperature readings in the unit.
The second reason could be a faulty control board. This is because if the thermostat is providing the correct command and reading to the control board, but the control board assumes the wrong signal, the oven will fail to maintain the temperature.
Let’s understand this in-depth: the thermostat is an electrical element in the ovens that measures the need for temperature in the unit. It mainly increases, decreases, and resets the temperature. But, this part alone doesn’t work.
It just measures the heat level and sends commands to the printed circuit board and controls the amount of electrical power passed through the elements. In case the Whirlpool oven has a faulty thermostat, its temperature levels will not be controlled accurately or as desired.
On the other hand, the control board in the oven has control over each part linked to it. It has control over the temperature levels of the oven.
Sometimes minor issues and short circuits happen on the board and on its elements. When this happens, your appliance doesn’t work perfectly.
How to fix the Whirlpool oven that keeps resetting?
If you’re experiencing issues with a Whirlpool oven that keeps resetting and the recommended solution is to replace the main printed circuit board, here are the steps you can follow to fix the problem:
- Safety precautions:
- Turn off the oven by unplugging it from the power outlet or flipping the circuit breaker dedicated to the oven.
- Allow the oven to cool down completely before starting any repair work.
- Accessing the main printed circuit board:
- Now, Locate the oven’s control panel, usually located at the front of the oven.
- Remove any screws or fasteners holding the control panel in place.
- Carefully detach the control panel from the oven, taking note of any wires connected to it. You may need to unscrew or unclip them.
- Identifying the main printed circuit board:
- You should be able to locate the main printed circuit board once the control panel is removed.
- Take a close look at the circuit board, noting any model numbers or other identifying marks. This information will be crucial when ordering a replacement board.
- Ordering the replacement circuit board:
- Contact Whirlpool’s customer service or visit their official website to find the correct replacement circuit board for your specific oven model.
- Provide them with the necessary details, such as the oven’s model number and the identification information from the old circuit board.
- Follow their instructions for purchasing and obtaining the replacement circuit board.
- Installing the new circuit board:
- Carefully unpack it and compare it to the old board to ensure it matches once you have the replacement circuit board.
- Disconnect any cables or connectors from the old circuit board, taking note of their positions or using a camera to document the connections for reference later.
- Remove the old circuit board from the oven by unscrewing any mounting screws or clips that hold it in place.
- Install the new circuit board in the same position and secure it with the mounting screws or clips.
- Reconnect the cables and connectors to the appropriate locations on the new circuit board, referring to the documentation or photos taken earlier.
- Ensure all connections are secure and properly seated.
- Reassembling the oven:
- Reattach the control panel to the oven, securing it with screws or fasteners.
- Double-check that all connections are properly made and secure.
- Plug the oven back into the power outlet or flip the circuit breaker back on.
- Test the oven to see if the issue with resetting has been resolved.
Note: If you’re uncomfortable with performing the repair yourself, it’s recommended to contact a professional appliance repair technician or Whirlpool’s authorized service center for assistance.
How to reset the Whirlpool oven control board?
Sometimes, resetting the control board of a Whirlpool oven can help resolve certain issues or errors. The process may vary slightly depending on the specific model of the oven, but here are some general steps you can follow:
- Ensure that your oven is disconnected from the power source by unplugging it from the electrical outlet.
- Leave the oven unplugged for approximately 5 minutes. This allows the control board to fully discharge and resets its internal memory.
- Plug the oven back into the electrical outlet after the waiting period.
- Turn on the oven by pressing the appropriate power button or knob. The control board should reset and initialize during the startup process.
- If your oven has a clock or timer feature, you may need to set it again after the reset.
- Once the oven has powered on, check if the previous issue or error is resolved.
Bottom Line
Temporary or permanent faults in the main printed control board lead keep the resetting issue in the whirlpool oven. Additionally, this is also important to inspect all other internal parts of the oven to address the cause. However, if the main control board is detected faulty, it will need to be replaced.