Each model of the Instant Vortex Air Fryer has a touch display that shows and sets smart programs. Undoubtedly their air fryer uses the latest technology and works well, but we cannot use it if the display of the Instant Vortex Air Fryer is not working.
It becomes necessary to find the root cause and fix it, thus we can utilize the unit further. If the same issue comes off with your unit, this guide is for you.
Wiring problems, dirty touch, no power, faulty circuit board, and damaged touch screen are possible causes of the non-functioning display of the Instant Vortex Air Fryer. However, it is important to investigate the root cause itself as most of the components are interdependent.
We’ve described everything you should know when the Instant Vortex Air Fryer display is not working.
Table of Contents
Why is Instant Vortex Air Fryer Screen Not Working?
Like other companies’ air fryers, you can rarely find press buttons on Instant Vortex Air Fryers.
Most of their air fryers have a touch display that shows symbols and users can set timer, temperature, and function by touching the screen.
A screen of the instant vortex has a connection with some electronic components that make a working chain.
Each component plays a role in the working of the display. The most important thing we require is to plug in the unit.
Sometimes we forget to plug in the unit or the loose plug gets out from the outlet and the unit faces no power issue.
If the unit has no power access, its display will not work and will not show any symbols. Instant Vortex Air Fryer display has wiring connected to it that makes the connection between the display and the circuit board.
If the wiring is burnt or broken, this can also make the touch screen non-working. It is necessary to keep the air fryer’s touch screen clean to keep the touch responsive.
If you’re touching the display with greasy fingers, this can make the touch dirty since grease can stick to it.
When the touch screen is dirty, it makes it unresponsive. On the other hand, If the display itself is faulty, it will not work and show no change.
Electric short happed in the display component can also make it unresponsive.
As the display gets power and commands to show from the circuit board, the PCB also should be responsive when it comes to testing why the air fryer displays are not working. Consider checking the printed circuit board also.
Reasons Instant Vortex Plus Air Fryer Screen Not Working?
Is your Instant vortex plus air fryer screen not working? If yes, you’ve all the reasons behind this issue which are described below. Screen-related problems are common in many Instant Vortex Air Fryers. However, this problem can happen because of a software glitch or hardware failure.
- No power
Whenever the Instant Vortex Air Fryer display is not lighting up, consider checking to check if the power is available to the device or not.
Sometimes the plug is not plugged in and we try to use the appliance. As the unit requires power to work and to show lights on display, this is necessary to have power availability in the outlet.
Consider checking the power cord status. Sometimes the outlet has power and the device is plugged in, but still, the appliance gets no voltage because of a broken and burnt power cord.
- Dirty touch
Some people don’t clean their fingers while touching the touch screen of the air fryer. If the fingers are dirty and have grease, this can make the touch dirty and grease gets stuck on the touch.
If the touchscreen is dirty, it makes it unresponsive while you are trying to set time, temperature, or function.
Furthermore, a dirty touch screen can still show numbers and symbols, as outer dust cannot affect the lights. Don’t use water to clean it, only use a dry soft cloth piece.
- Software Glitch
The central component(PCB) of the Instant Vortex Air Fryer uses software to show changes on the screen.
If its screen is frozen/hanging and not showing touching it, there might be a software glitch occurring in the unit.
Software glitch is a temporary fault in appliance operating software that remains for a short period.
You can remove the software glitch from your air fryer by simply resetting it. Unplug it for 1 to 5 minutes and plug in it back could reset the main unit, and the freeze screen will start working fine again.
- Wiring problems
As we discussed before, an air fryer has several connections of wires in it. Its display is connected to a circuit board with the help of wires.
If any of the wire from them is broken or burnt, this can also make the Instant Vortex Air Fryer display not work.
Moreover, these connections are hidden inside the main unit. You have to remove the cover of your unit, to access the backside and wiring of its screen. If you find any wire broken or burnt, it will need to be replaced.
- Non-working Membrane Switch
There is a membrane switch in the unit which makes communication between touch and screen.
If for any reason it stopped working, this can also make the instant air fryer’s screen unresponsive.
To fix this part, you have to get help from a professional technician. However, the chances are less that the membrane switch is non-working when the unit shows no light on display.
- Faulty circuit board
A circuit board is the central electrical component that has control over each electrical part of your air fryer.
It gets input from the touch screen of the Instant Vortex Air Fryer and sends back the output to represent the LCD. It also provides power to display to work.
In case the circuit board has a broken connection with the air fryer’s display and fails to make a connection with the screen, it can cause an Instant Vortex Air Fryer display not to work.
To access this part, you have to disassemble the cover of the main unit.
- Damaged touch screen
If you have tested all the components which play roles in the functionality of the air fryer display, and all of them are working fine, The touch screen might be faulty itself.
You should look at the back side of the display when removing the covers. If you find black marks and burnt components there, you have to replace the damaged touch screen.
Consider checking the model number of your unit to get the same touch screen for replacement.
How to Fix an Instant Vortex Air Fryer Display That’s Not Working?
Instant Vortex Air Fryer displays represent symbols and buttons to utilize its functionality. But, if it is not working as it should be, you have to address the cause behind the issue.
You must consider contacting a professional technician when you are not sure and have no experience with this work. Still, you should know how to fix it.
Below are Steps to Fix Instant Vortex Air Fryer Display that’s Not Working:
- First of all, you must check whether the unit has power access. To do this, check if the cord is plugged in and the outlet has power.
- If its display hangs, reset the unit. Unplug the unit and let it rest for a few minutes. Plug it back in after 2 or 5 minutes. If there was a software glitch, doing this can fix it.
- If the screen is still not working, you have to investigate the internal fault. Take a screwdriver and open all the cover screws. First, remove the top cover and then remove the side cover.
- Now, you have access to all internal components and the backside of the display. Check from the circuit board to display. If the wire, circuit board, or display, one part is damaged, you have to replace them. Remove the faulty part once you have the same new part to replace the faulty one. Read the model number given on one side of the appliance to find its spare part for replacement.
- Once the faulty part is replaced, assemble the open covers back. Now, turn on the appliance, and the screen starts working again.
Can you Replace Instant Vortex Air Fryer Display?
Replacing the Instant Vortex Air Fryer display is a possible task. If it is not working since it is damaged, you can replace it once you have a new one to replace.
You can also contact the manufacturer for this task. The important thing to consider is that we cannot fit another model’s display on the Instant Vortex Air Fryer.
First, you have to read and understand the model number of your unit to find its spare part online or offline.
Apart from this, you can also contact manufacturer support for a free fix when your unit is brand new and is under warranty.
Conclusion
As an owner of the Instant Vortex Air Fryer, you must consider cleaning the display and resetting the unit before you do further investigation about why its display is not working.
This issue can be caused by software failure and hardware failure. You have to address the cause manually by disassembling the unit covers.
If the unit was dropped on the floor and shows there is an issue, there is probably a hardware-related issue.