The display of a washing machine is a necessary component and should be working well to operate the appliance. One of the common problems with a Bosch washing machine is when the display panel is not working.
If your Bosch washing machine display is not working, there are several reasons why this may occur, and in this article, we will discuss them and how to fix the issue.
Technically, No power availability, broken wiring connection, stuck dirt, and probably a bad display itself are common reasons why the display of your Bosch washing machine is not working. To make it responsive, you will need to manually address the actual issue in the unit.
We’ve described everything you need to know when a Bosch Washer Display is not working, Thus you can fix it yourself.
Table of Contents
Reasons Bosch washing machine display panel not working?
In fact, There is not a single reason behind a blank bosch washing machine screen. In several tests, we found that five main causes can make a washer display non-working.
Here’re the most common causes of unworking washer displays:
- Power Issue:
The first and most common reason for a blank screen on the Bosch washing machine is a power issue. Sometimes the outlet has no power in it where we plug the appliance.
So, Check the power outlet and ensure that the machine is properly plugged in and the wall electrical outlet has power access. If the outlet is functioning correctly, then check the circuit breaker and make sure it has not tripped.
If your washer has no power, all of its components will not work including its display panel.
- Faulty Control Board:
Another reason for the Bosch washing machine screen being blank could be a malfunctioning control board. Technically, The control board is the brain of the washing machine, and if it is faulty, it can lead to a blank screen.
However, it is a rare case that could be the reason behind the unworking display. Every symbol you see on the display of your washer is made by a control board. A faulty control board needs to be replaced by a professional.
- Damaged Wiring:
The wiring in a washing machine is vital to its operation, and any damage to the wiring can cause the display panel to malfunction. The display has a wire connection between it and the control board.
If this connection got damaged due to broken wires, the screen will not work. If you find the wiring is damaged, it needs to be replaced.
- Broken Display Screen:
A broken or damaged display screen can also be the reason for a blank screen on the washing machine. Poor build an electric shot are two primary reasons why some displays get damaged.
Even the Bosch washers are quality built yet their parts can get damaged when an electric shock happens. You may not see any damage from the front of the screen, sometimes it requires looking at its back to investigate the damage.
- Dirt:
If the display is lighting up and showing the symbols correctly, but not responding when you touch it, maybe there is a dirt layer built up. It means the display is fine, but its touch has a thin dirt layer that is required to be cleaned.
So, In this case, simply cleaning it can make it responsive again. Make sure you don’t touch it with dirty hands.
How to Fix the Bosch washing machine display that’s not working?
Before attempting to fix the display panel of your Bosch washing machine, it’s important to unplug the machine from the power outlet. However, to test if the screen is working or not, it requires turning on the appliance.
Here are steps to fix the display panel of the Bosch Washer:
- Check the power outlet and circuit breaker:
Ensure that the power outlet is working correctly and that the circuit breaker has not tripped. If it has, reset the circuit breaker and try turning the washing machine on again.
- Check the wiring:
Firstly, make sure your washer is disconnected from the power source. Next, locate the screws or clips holding the display panel in place. These are usually found at the top or back of the panel. Use a screwdriver or pliers to remove them, and gently lift the display panel from the washer.
Once the display panel is removed, you should be able to see the wiring connection that leads to the control board. Check the connection for any damage or lose wires. If the connection is damaged or broken, it may need to be replaced. If the wires are loose, gently push them back into place and make sure they are securely fastened.
If the wiring connection is damaged, Get the same new wiring connection and connect it between the display and control board. Once everything is fixed, assemble all the components by following the steps in reverse.
- Clean the Display Touch:
If the Display is lighting but not responding by touching it, clean it with a dry and clean cloth. You can use one drop of cleaning agent to make the process easy. If the dirt was the issue, the display will start working and responding again.
- Replace the Damaged Display:
If the above steps do not work, the display is bad and needs to be replaced. To do this, First, make sure the washer is disconnected from the power source to avoid any electrical hazards. Next, remove the screws or clips holding the damaged display panel in place. Gently lift the panel from the washer and disconnect any wires or cables leading to it.
If you’re unsure if the display is bad, check for any visible damage, such as cracks or scratches. You can also try resetting the washer by unplugging it for a few minutes and then plugging it back in. If the display still does not work, it may need to be replaced.
To replace the damaged display, you will need to purchase a replacement part from an appliance repair shop or online retailer. Make sure to match the model number of the replacement part to the washer to ensure compatibility. Simply remove the damaged display and fit a new one there. Now, Reconnect any wires or cables to the new display panel and securely fasten it in place with screws or clips.
Once the new display panel is installed, reconnect the power source and test the washer to make sure it is working properly.
What to do When the Bosch washing machine display is not working?
If your Bosch washing machine display panel is not working, the first thing you should do is unplug the machine from the power outlet. Then, check the power outlet and circuit breaker to ensure that they are functioning correctly.
If everything seems to be working fine, check the wiring for any damage or loose connections between the display panel and the control panel as we described in the above section. If you are unable to fix the issue, get the help of a professional.
How Does Washing Machine Display Work?
The display panel in a washing machine is connected to the control board, which is responsible for controlling the various functions of the washing machine.
When you turn on the washing machine, the control board sends signals to the display panel, which then displays the necessary information, such as the cycle time, temperature, and spin speed.
Conclusion
A blank screen on a Bosch washing machine can be caused by various factors, such as a power issue, a faulty control board, damaged wiring, or a broken display screen. If you encounter this problem, follow the steps outlined in this article to fix the issue.
However, if you are unsure or uncomfortable with performing any of the steps, it is recommended to get help from a professional technician.