There are mainly two types of Fisher and Paykel washing machines, one is the top loader and the other is the front loader model.
Each model has one filter, but the number of filters depends on the model number. This guide describes Fisher and Paykel washing machine filter locations by model.
Some Fisher and Paykel washing machines have only one filter, but some have more. A filter in the washer plays a huge role in the functioning of the washer as it traps dirt and particles from the drum water and prevents them from entering the drain pump.
This is necessary to have a clean drain pump filter to keep draining performance fine. A clogged filter can cause draining issues in the washer.
If you are confused about thinking that Fisher and Paykel washing machines have a filter, the answer is next.
Table of Contents
Here is where the washing machine filters Locations are:
Front loader Fisher and Paykel washing machines have a pump filter behind a hatch, and their top loader washers have a filter under the agitator cover, with a lint filter in the drum on one side. However, some older models also have inlet fitters attached to the ends of the inlet hoses.
It is best to find filters manually in recommended locations. Fisher and Paykel have launched a variety of washer models, so the filter locations can vary on model number. When you find the filter, remove the water from the washing drum before removing the pump filter.
Where is the pump filter on a Fisher and Paykel washing machine?
The pump filter acts like a security guard for the drain pump. It traps particles and dirt from drain water and prevents them from entering the drain pump. This is important to keep the drain pump clean before using the washer. And to clean the filter, the user must know where it is located.
Fisher and Paykel washing machines have a pump filter in the bottom of their front exterior, there is a small hatch in the bottom, and you will find a pump filter behind the hatch. It is recommended to clean the pump filter at least once a month.
In case you use your washer many times a day, consider cleaning the pump filter at least once every two weeks. The pump filter of the Fisher and Paykel washer looks round and cylindrical and is made of plastic. Moreover, it is removable. technically, the pump filter is connected to the pump housing. Sometimes we find washing machine filters leaking, this could happen when the filter is not locked securely or has something broken.
Where is the Filter on Fisher and Paykel Top Loader Washing Machines?
Typically, Fisher and Paykel top loader washing machines have three types of filters in three different locations. You can find a drain filter attached to drain pump housing, inlet filters on inlet hose connections, and in agitator models, there is a filter under the agitator over. In case the to[ loader model is the impeller, you can find a lint filter on one side inside the washing tub.
Top loader models are different in design in comparison to their front loader washers, that’s the reason filter locations are different in top loader models.
If the water supply is on, but water is not entering the washing tub, check the inlet hoses and their filter. A clogged inlet filter cannot allow water from entering the tub, so keep it clean. If water is not coming after turning on the inlet water supply, must check the inlet filters.
Some Fisher and Paykel top loader washing machine models only have a filter under the agitator instead of a drain pump filter. If the drain pump is not draining water, make sure the pump filter is clean. Cleaning the clogged pump filter can solve the water-draining issue in the washer.
Fisher and Paykel washing machine lint filter location?
Fisher and Paykel washing machine lint filters are located inside the washing basket on one side. If it is a top loader model with an agitator, the lint filter is connected inside the agitator dispenser cover. If it is an impeller model, the lint filter is attached inside the drum on one side of the filter housing.
The lint filter should be always cleaned before doing laundry in the washer. To access the lint filter in Fisher and Paykel washing machines, remove the fabric dispenser cap from the agitator.
However, the lint filter is an optional component in your Fisher and Paykel washer. The company officially declared that their washer can drain the lint along with wastewater. But, having a clean lint filter is proven to make washing fabric lint-free and provides the best cleaning results.
You can simply remove this part with your fingers by pressing the filter housing slots. Once the lint filter is removed, use a soft brush to clean it out.
How do clean Fisher & Paykel Washing Machine filter?
Whether the drain pump is not drawing water or it is working fine, you should clean the filter of the Fisher & Paykel washer to maintain its working. Dirt, particles, and soap buildup can clog the pump filter. However, as there are different sorts of filters in your Fisher & Paykel washing machine, you need to understand how to clean each.
Here’s how to clean the pump filter of the Fisher & Paykel washing machine:
- First of all, isolate the washer from the mains. Ensure that your unit is not connected to any outlet.
- Take a towel and bowl. Put the towel down to drain the pump filter location. Open the hatch and access the filter.
- Remove the water through the emergency hose and fill that water in any container like a bowl before opening the filter.
- Rotate the coin trap counterclockwise and remove the pump filter.
- Take a brush and rub it on the mesh to clean it. Put some water on the filter.
- Now, line up the bottom notch of the filter with the drain pump housing’s internal tab and put it into the pump housing. Rotate the filter clockwise to tightly lock the filter. All done.
Here’s how to clean Fisher and Paykel washing machine lint filter:
- Unplug the unit from the outlet.
- Access the lint filter in the washing tub. If it is an impeller model, you will find a lint filter on one side of the drum, and if it is an agitator model, the lint filter can be accessed by removing the dispenser cap.
- Remove the filter from the housing.
- Take a brush and start cleaning the filter. Ensure you don’t rub hard as it can damage the mesh.
- Once the filter is cleaned, connect it back to the filter housing.