If your washing machine is draining slowly or not draining waste, it might happen because of some possible issue inside the parts. It is a common problem that the majority of users face when their machines require maintenance.
Moreover, if someone asked you if this issue is happening because of a clogged drain and you’re thinking can a washing drain hose get clogged? This article is for you. We’ve gathered all information that you can use to fix and identify the drain issues in your device.
Washing machine drain hoses often become clogged with detergent residue. The drum drain discharges gray water with dirt particles during the cycle, and if the dirt gets trapped inside the drain, it causes a blockage. This results in slow or no emissions.
Let’s understand what you should do if your washing machine drain hose gets clogged.
Table of Contents
How do I Know If my Washing Machine Drain Hose is Clogged?
If your Indesit, Whirlpool, Samsung or Lg washing machine is clogged, it will show some symptoms, such as slow draining, no draining, and water coming back to the machine. However, to be sure that there’s a blockage inside the pipe, you should have to look inside it.
So what will happen when the washing machine drains and the hose are clogged?
Here’s the answer:
Commonly some washing machines start draining slowly when some particles are stuck inside the hose. These particles are dust and detergent residue.
As we all know, a drain hose should be cleaned for proper drainage. Most people don’t pay attention to checking the inside state of the drain tube, which speeds up the clog-creation process.
It speeds up because if you clean dirt often, it prevents clog creation.
If the drain hose is longer and you cannot see properly inside it, use an iron wire and put it inside the hose.
Drive the wire from one end to another. If a clog exists, the wire will stop running through it. It also cleans normal dust. Once a blockage is detected, use that wire to unclog the drain hose.
A clogged drain also releases an odor that’s a symptom that some detergent residue and gray water dust are stuck.
The weight of the hose will also increase because of the additional dust weight, but it will not be that much that you can measure by holding the pipe.
If you drain your washer and water does not come through the hose, there will be a blockage.
How do you Unclog a Washing Machine Drain Hose?
A clogged drain hose creates several problems. Once you report this issue, you should have to clean it before using your appliance. It takes only 4 to 8 minutes to unclog a drain hose.
Two easy methods will help you to clean it. In the first method, we will use an iron wire. In the second, we are going to use air pressure.
Here’s how to unclog a drain hose:
- Detach the drain hose from the washing machine’s backside.
- Get an iron wire that has more length than the pipe.
- Insert the wire into the hose and try to find a clog location.
- Once a clog point is reported, hit the wire with little force on that blockage dirt.
- After the clog comes out from the hose, run hot water through it. It will reduce hard residue and odor from the pipe.
- Reattach the drain hose to the washing machine. All done!
The recent method is described without air pressure use, now you are going to learn an unclogging method with air pressure.
- Detach the drain hose from your washing machine.
- Take it near the air compressor.
- Start the air compressor and put its air-releasing pipe inside the hose.
- Air pressure will put off the dirt, residue, or odor from the pipe.
- Run hot water through the hose, making it properly clean and odor free.
What Item will Unclog a Washing Machine Drain Hose?
You can use different items to unclog the washing machine drain hose, such as an iron wire, air compressor pressure, hot water, etc.
Choose one method and item that you realize is easy for you. Hot water is clean and weakens the stuck dirt bond inside the item.
Use solid iron or any metal wire that cannot bend easily. We need a strong wire that moves easily but cannot bend easily. A Wire works fine, whether it is flexible or not.
Air pressure can pull things easily. A clog can be pulled by high air pressure. The Air pressure method takes a little bit more time but can clean effectively.
Moreover, it is not necessary to unclog pipe only with air pressure, you can also use wire as we described. Follow our unclogging methods which are easy to follow for everyone.
If the drain hose is frozen and feels like it can be broken by just one hit, don’t use a sharp end having a wire.
First, put hot water inside the hose, and shake the hose. By doing this you weaken the blockage as hot water has rapidly moving molecules that can weaken the bond of dirt with anything.
Cause of washing machine clogged drain hose:
You got a clog in your washing machine but you don’t know the actual reason or if you don’t have this issue with your device, it will be worth it for you to learn about common causes of washing machine clogs.
Let’s understand!
Every time we run a drain cycle, the machine discharges gray water full of detergent residue.
Washing machine drain hoses have a rubber tip at the end point where clogs mostly formed. When detergent residue is stuck inside the hose, making it difficult for drained water to run through the pipe.
Clogs can be formed by oil, grease, detergent residue, and dust from clothes.
If you use your washing machine to wash your work clothes containing grease, dust, or oil, the machine washes out these particles from your clothes and drains away through the hose, but these dirt particles can be stuck inside the drain pump or hose.
Cleaning the hose twice a month can prevent clogs from forming. Care from your side is necessary for your device maintenance.
However, chances are less that blockage can create inside your washer hose if you do normal dirt clothes laundry.
To Summarize
Stuck detergent residue creates blockage inside the washing machine drain hose. The device drains slowly and sometimes does not drain when the hose gets clogged. However, it is a simple task to unclog it, use a metal wire and hot water, and run both things through the pipe to pull out the blockage particles.